D210
MVB Repeater Single / Redundant
| D210 |
|---|
|
| MVB Repeater Single / Redundant Enables interoperability due to two galvanically isolated MVB nodes with EMD and ESD+, Two identical halves support functional redundancy, Allows for more than 32 nodes per MVB segment and increases cable length limits, Allows for logical MVB system to span several vehicles within fixed train set, 24V – 110V Power Supply Supported |
D212
MVB Star Coupler
| D210 |
|---|
|
| MVB Star Coupler EMD, ESD+, OGF 5x (1x), 24-110Vdc, DIN Rail Mount |
D220C
CAN Repeater
| D220C |
|---|
|
|
| CAN Repeater Fully transparent for all higher layer protocols like CANopen or J1939, Baudrate up to 1Mbit/s, Galvanic separation 1kV, - 40°C to + 70°C operating temperature |
D512
Ethernet Repeater
| D512 |
|---|
|
|
| Ethernet Repeater Completely transparent to all Ethernet protocols, Full or half duplex communication (restriction to 2 ports), Very low latency (<2us), Full 10Mbit or 100Mbit bandwidth (unlike “Ethernet extenders”), Customer specific port configurations for Auto Negotiation and Auto Crossing possible, Battery voltage input (up to 110V) eliminates the need for an external power supply, Can optionally also be powered from PoE, Power interruption class S2: No service needed thanks to design without electrolytic capacitor, Complies to IEC61375, EN50155, EN50121 and IEEE802.3 |
D650
Passive Ethernet TAP
| D650 |
|---|
|
|
| Passive Ethernet TAP Passive Ethernet terminal access point (TAP) with guaranteed non-retroactivity down to the physical layer, Monitors up to two 100 Mbit/s Ethernet network lines, Power-over-Ethernet (Powered Device) capable, - 40°C to + 70°C operating temperature |