- 3U CompactPCI® 4HP
- CompactPCI® • Quad Port USB 3.0 Controller
- 4 x USB 3.0 host ports
- 5V/1.5A USB power switches - USB Type A connector
- Compliance with PICMG 2.0 R3.0, Peripheral slot
- XMC Module
- XMC Mezzanine Module • USB 3.0 Host Controller
- Form factor XMC single-width mezzanine card 139mm x 74mm
- Host I/F Connector P15 XMC – PCI Express, single lane, single link
- 3 x USB 3.0 host ports - USB Type A connector
- 3U CompactPCI® Serial 4HP
- USB 3.2, UART & M.2 SSD Interface Board
- 1 x RS232, 1x RS422/RS485
- 3 x USB 3.0
- 1 x NVMe M.2 SSD slot - RS232, RS422/RS485 D-SUB, USB Type A connector
- CPCI-S backplane connectors P1
- 3U CompactPCI® Serial 4HP
- CompactPCI® Serial Quad Port USB 3.0 & eSATA Combo Connectors
- USB 3.0 quad port SuperSpeed controller
- SATA RAID 6Gbps quad channel host controller - 4x USB3.0 / eSATA combo connectors
- CPCI-S backplane connectors P1
- PCI Express Mini Card
- USB HID to analog audio
- HID interface to operating system
- 1 stereo input and 1 stereo output - PCI Express Mini Card: Full-Mini; USB 2.0
- 3U CompactPCI® 4HP
- CompactPCI XMC Module Carrier Card, 1 x PCI Express® Lane Gen1 (2.5Gbps) Supported
- Compliance with PICMG 2.0 R3.0, Peripheral slot
- 3U CompactPCI® Serial 4HP
- CompactPCI Serial PMC Module Carrier Card, 1 x PCI Express® Lane Gen1 (2.5Gbps) Supported
- CPCI-S backplane connectors P1
- 3U CompactPCI® Serial 4HP
- CompactPCI® Serial XMC Module Carrier, 8 x PCI Express® Lane Gen1, Gen2 or Gen3 (8GT/s)
- CPCI-S backplane connectors P1 & P2 (fat pipe slot up to PCIe® x 8)
- 3U CompactPCI® 4HP
- Railway I/O Board for Digital I/O
- 4HP 32-bit/33-MHz CompactPCI
- 16 bidirectional digital I/Os
- Organized in 4 optically isolated groups
- Reduced wiring for fast installation
- I/O voltage range 14.4 VDC to 154 VDC
- Current output 1 A at 24 V - 4 x 4 spring cage terminal blocks
- Compliance with PICMG 2.0 R3.0, Peripheral slot
- 3U CompactPCI® 8HP
- Railway I/O Board - Data Acquisition & Control
- 16x DO / 8x DI
- 2x AO, current and voltage
- 2x PWM
- 2x pulse counter inputs - DIN 41612 Straight-type spring-loaded connector Type F, 48Pin EN 60603-2
- Compliance with PICMG 2.0 R3.0, Peripheral slot, 32-bit/33-MHz CompactPCI bus, V(I/O): +3.3 V
- 3U CompactPCI® Serial 4HP
- Railway I/O Board for Digital I/O
- 4HP 32-bit/33-MHz CompactPCI
- 16 bidirectional digital I/Os
- Organized in 4 optically isolated groups
- Reduced wiring for fast installation
- I/O voltage range 14.4 VDC to 154 VDC
- Current output 1 A at 24 V - 4 x 4 spring cage terminal blocks
- CPCI-S backplane connectors P1
- 3U CompactPCI® Serial 4HP
- CompactPCI® Interface with 16 DI and 16 DO
- 16 Digital Inputs and 16 Digital Outputs
- 16x DI 24 V / 16x DO 24 V, 250 mA
- All inputs and outputs electrically isolated
- Error detection signal / USER LED - 50-pole DSUB, female
- Compliance with PICMG 2.0 R3.0, Peripheral slot
- 3U CompactPCI® Serial 8HP
- CompactPCI® Interface with 32 DI and 32 DO
- 32 optically isolated DI, 24 V
- 16 interruptible and 3 counter inputs,
- Inputs organised in 4 groups of 8 channels - 32 optically isolated DO, 11 V to 36 V
- Output current per channel 500 mA
- Total current for 8 outputs 1.85 A
- Electronic fuse - Front 37-pole DSUB, female(DO), Ribbon cable 37-pole DSUB (DI)
- Compliance with PICMG 2.0 R3.0, Peripheral slot
- 3U CompactPCI® Serial 4HP
- SATA HDD/SSD Shuttle
- Hard disk drive or solid state drive shuttle
- 2.5" SATA HDD/SSD slot
- Four status LEDs - CPCI-S backplane connectors P1
- 3U CompactPCI® Serial 4HP
- NVMe SSD Rapid Storage Shuttle
- Solid state drive shuttle
- 2.5" NVMe SSD U.2 slot
- NVMe SSD M.2 slot (optional)
- Two status LEDs - CPCI-S backplane connectors P1
- 3U CompactPCI® Serial 4HP
- Rugged Storage Expansion Board with 4x M.2 NVMe SSD Slots
- Supports 4× M.2 NVMe SSDs (PCIe 3.0 x4)
- 2230/2242/2260/2280 card sizes
- Large aluminum heatsink
- Drive control interface and thermal monitoring
- 11 status LEDs
- Onboard Power Loss Protection - CPCI-S backplane connectors P1 & P2 (fat pipe slot up to PCIe® x 8)
- 3U CompactPCI® Serial 4HP
- Dual 2.5″ SATA Storage Expansion
- 2× 2.5" SATA 6Gbit/s
- Temperature sensors for board and drives
- Drive control and sensor readout via I2C
- 7 status LEDs - CPCI-S backplane connectors P1
- 3U CompactPCI® Serial 4HP
- M.2 PCIe x4 (NVMe) SSD Module Carrier Board
- M.2 NVMe SSD module socket (M-key), PCIe 3.0 x4
- M.2 module size 22110, 2280, 2260, 2242, 2230 - CPCI-S backplane connectors P1
- 3U CompactPCI® Serial 4HP
- Dual M.2 PCIe x4 (NVMe) SSD Module Carrier Board
- M.2 NVMe SSD module socket (M-key), PCIe 3.0 x4
- M.2 module size 22110, 2280, 2260, 2242, 2230
- M.2 SATA SSD module socket (B-key)
- M.2 SATA module size 2280, 2260, 2242, 2230 - CPCI-S backplane connectors P1 & P2 and SATA (fat pipe slot up to PCIe® x 8)
- 3U CompactPCI® Serial 4HP
- CompactPCI® Serial Quad M.2 NVMe® (PCIe®) SSD
- M.2 NVMe SSD module socket (M-key), PCIe 3.0 x4
- M.2 module size 22110, 2280, 2260, 2242, 2230
- 4TB NVMe® modules available as of current for a total of 16T - CPCI-S backplane connectors P1 & P2 (fat pipe slot up to PCIe® x 8)
- 3U CompactPCI® Serial 4HP
- U.2 NVMe® SSD Carrier Board
- Mounting holes for 2.5-inch U.2 NVMe® drive
- Maximum U.2 height 15mm - CPCI-S backplane connectors P1