- D210
- MVB REPEATER SINGLE/REDUNDANT
- Enables interoperability due to two galvanically isolated MVB nodes with EMD and ESD+
- Two identical halves support functional redundancy
- Allows for more than 32 nodes per MVB segment and increases cable length limits
- Allows for logical MVB system to span several vehicles within fixed train set
- 24V – 110V Power Supply Supported
- D212
- MVB STAR COUPLER
- EMD, ESD+
- OGF 5x (1x)
- 24-110Vdc
- DIN Rail Mount
- D220C
- CAN REPEATER
- Fully transparent for all higher layer protocols like CANopen or J1939
- Baudrate up to 1Mbit/s
- Galvanic separation 1kV
- -40°C to +70°C operating temperature
- D512
- ETHERNET REPEATER
- Completely transparent to all Ethernet protocols
- Full or half duplex communication (restriction to 2 ports)
- Very low latency (<2us)
- Full 10Mbit or 100Mbit bandwidth (unlike “Ethernet extenders”)
- Customer specific port configurations for Auto Negotiation and Auto Crossing possible
- Battery voltage input (up to 110V) eliminates the need for an external power supply
- Can optionally also be powered from PoE
- Power interruption class S2: No service needed thanks to design without electrolytic capacitor
- Complies to IEC61375, EN50155, EN50121 and IEEE802.3
- D650
- PASSIVE ETHERNET TAP
- Passive Ethernet terminal access point (TAP) with guaranteed non-retroactivity down to the physical layer
- Monitors up to two 100 Mbit/s Ethernet network lines
- Power-over-Ethernet (Powered Device) capable
- -40°C to +70°C operating temperature