- 3U CompactPCI® 4HP
- 4 x isolated front panel RS-485 ports, Pericom® PCI Express® octal UART PI7C9X7958, 16C550 software compatible
- 4 x RJ45, 3 x D-sub9
- Option CompactPCI® backplane connector J2 for rear I/O (4 x UART TTL level signals)
- 3U CompactPCI® 4HP
- 4 x isolated front panel RS-232 ports, Pericom® PCI Express® octal UART PI7C9X7958, 16C550 software compatible
- 4 x RJ45, 3 x D-sub9, 4 x D-sub9 (Ribbon flat)
- Option CompactPCI® backplane connector J2 for rear I/O (4 x UART RX/TX CTS/RTS TTL level signals)
- 3U CompactPCI® Serial 4HP
- 4 x isolated front panel RS-485 ports, Pericom® PCI Express® octal UART PI7C9X7958, 16C550 software compatible, On-board DIP-switches for full/half-duplex setting, and line termination on/off
- 4 x Micro-D9, 3 x D-sub9, 8 x Micro-D9(8HP)
- Option CompactPCI® Serial backplane connector P4 for rear I/O
- 3U CompactPCI® Serial 4HP
- 4 x isolated front panel RS-232 ports, Pericom® PCI Express® octal UART PI7C9X7958, 16C550 software compatible
- 4 x Micro-D9, 3 x D-sub9, 8 x Micro-D9(8HP)
- 4 x Rear I/O UART ports (TTL Level), wired to P4 for optional usage with RIO module
- 3U CompactPCI® Serial 4HP
- 8 x Isolated RS-485 & RS-232 / Modular Design, Pericom® PCI Express® octal UART PI7C9X7958, 16C550 software compatible
- 4 x RJ45 or Micro-D9, 8 x RJ45(8HP), 6 x D-sub9 (8HP)
- 4 x Rear I/O UART ports (TTL Level), wired to P4 for optional usage with RIO module
- 3U CompactPCI® Serial 4HP
- 8 x Isolated RS-485 & RS-232 by means of DIP-switches, Pericom® PCI Express® octal UART PI7C9X7958, 16C550 software compatible
- 8 x Micro-D9, 8 x RJ45(8HP), 6 x D-sub9 (8HP)
- Each UART port can be individually redirected to P3, P4 backplane connectors (TTL level) via DIP-switch configuration
- 3U CompactPCI® 8HP
- UART, CAN Bus & Digital I/O Interface Board
- Five interface options can be selected on the 8HP front - 5 x D-sub 9pin
- Selectable options
- 2 × RS232, non-isolated, D-Sub, 9-pin, plug
- 2 × RS232, isolated, D-Sub, 9-pin, plug
- 2 × RS422/RS485, isolated, D-Sub, 9-pin, receptacle
- 2 × CAN isolated, D-Sub, 9-pin, receptacle
- 1 × HD-Sub, 15-pin, receptacle
- 3U CompactPCI® Serial 8HP
- UART, CAN Bus & Digital I/O Interface Board
- Five interface options can be selected on the 8HP front - 5 x D-sub 9pin
- Selectable options
- 2 × RS232, non-isolated, D-Sub, 9-pin, plug
- 2 × RS232, isolated, D-Sub, 9-pin, plug
- 2 × RS422/RS485, isolated, D-Sub, 9-pin, receptacle
- 2 × CAN isolated, D-Sub, 9-pin, receptacle
- 1 × HD-Sub, 15-pin, receptacle